Colorful 3014 SMD LED Chip Beads Low Brightness Decay Apply To Traffic Lights

Product Details:
Place of Origin: SHENZHEN
Brand Name: Yuhang
Certification: CE.SGS.ROHS
Model Number: YH3014NW01
Delivery Time: 5-7 work days
Payment Terms: T/T, Western Union,Paypal
Supply Ability: 8KK/Days

Detailed Product Description

Type:	smd led	Chip Material:	InGaN
Emitting Color:	Red	Luminous Intensity:	Customers' Requirements
Luminous Flux(lm):	700-900mcd	Power:	0.1W
Viewing Angle(°):	120 Degree	Color Rendering Index:	Null
Color Temperature:	620-630nm	Operating Temperature:	-20 - 85
Chip Brand:	Epistar Chip, Sanan Chip,Epileds Chip	Current:	30mA
Voltage:	2.0-2.4V	Warranty:	2 Years
Lifespan:	50000-100000H

Factory Sale crees red 0.1w 620nm colorful 3014 smd led chip beads for traffic lights

Product features:

1. High Lumens Output & Low Brightness Decay
2. Stable Performance & Great CCT Inity.
3. Wid Color Temperature Range

Product Description

Colorful 3014 SMD LED Chip Beads Low Brightness Decay Apply To Traffic Lights

Product quality:

1. First-Choice for Indoor Ligting
2. Good raw materials
3. Copper layer
4. Gold wire connection

5.San'an chips
6. Lifespan is >50 000 hours easily

SURFACE MOUNT LED LAMPS
Product Type:YH3014R
Absolute maximum ratings (Ta=25°C)
Parameter			Symbol			Value			Unit
Forward current			If			30			mA
Reverse voltage			Vr			5			V
Power dissipation			Pd			100			MW
Operating temperature range			Top			-25~+80			°C
Storage temperature range			Tstg			-30~+85			°C
Peak pulsing current(1/8 duty f=1KHz)			Ifp			50			mA
Junction Temperature			Tj			115			℃/W
Electrostatic Discharge(HBM)			ESD			1000			V
Electro-Optical characteristics (TA=25°C)
Parameter	Test Condition	Symbol		Color	Value					Unit
					Min		Typ	Max
Color Temperature	IF=30mA	CCT		R	--		--	--		K
Forward voltage	IF=30mA	Vf		R	2.0		--	2.6		V
luminous flux	IF=30mA	φ		R	700		--	900		MCD
Viewing angle at 50% IV	IF=30mA	2θ1/2		R	--		120	--		Deg
Dominant wavelength	IF=30mA	λd		--	620		--	630		nm
Reverse current	Vr=5V	Ir		R	--		5	--		μA
Color Rendering Index	IF=30mA	CRI		--	--		--	--		Ra

Reel Dimensions:

Carrier Tape Dimensions:

Loaded quantity 4000 PCS Per reel.

Please read the following notes before using the product:

1. Over-current-proof

Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 The LEDs should be used within a year.

2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.

2.5 The LEDs should be used within 168 hours (7 days) after opening the package.

2.6 If the moisture adsorbent material (silica gel) has fabled away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile.

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

4. Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.

5. Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

Application field

Are widely used in the LED lamp, LED bulb light, LED panel light, LED ceiling lamp, LED street light, LED lamp, miner's lamp, stage light, flashlight, lighting, lamp lighting lamps and lanterns, as well as outdoor billboards, such as electronic display, traffic lights, signs, car tail lights, LED modules, LCD back light, LED lighting lighting, LED soft/hard light bar, etc., is the better choice to replace traditional lighting light source.

PREVIOUS：Yellow Orange 3014 SMD LED 585nm / 590nm / 595nm For Led Car Turn Signal NEXT：Professional Pink Led Lamp Chip 120 Degree Viewing Angle 2 Years Warranty